Part  No.

Return to Grills & Back-boxes Index

E15

E15-4

E15-6L

• Most commonly used enclosure for 5" speaker assemblies
• 3-1/2" deep, 6" round(E15-4 is 4" deep, E15-6L is lined with 5/16" fire retardant insulation and is 6" deep)
• ULC listed as part of a speaker device, E15, E15-4
• Made from satincoat 20 gauge CRS.
• Mounting Straps welded at 180 degrees for easier mounting into difficult conditions
• 4 combination knockouts for conduit
• ground screw installed on E15
• 
• E15
• E15-4

1. G15W
2. G15PW
3. G71W

0.05

0.06

0.2

• Designed for suspended speaker type applications
• 6" Round, 6" Deep
• Made from 20 gauge CRS.
• Mounting Straps are NOT provided
• 1/2" hole on side provided for plastic wire strain relief
• Inside bottom lined with anti resonance material
• 0.2 CuFt
• 
• SE600W

1. Included

• 0.25 Cu Ft Volume, for better frequency response
• 10" Round, 6" Deep
• Made from 20 gauge CRS.
• Mounting Straps are provided
• AEG MC1-P mounting rails are suggested for tile mounting.
• 4 combination knockouts for conduit
• Inside Lined with anti resonance material
• 
• EA21

1. GA21W

• Most commonly used enclosure for 5" speaker assemblies where a square grill is required
• 4-5/8" deep, 5-1/2" square
• ULC listed as part of a speaker device
• Ground Screw Included
• Made from satincoat 20 gauge CRS.
• Mounting Slots are provided to be used in conjunction with AEG MC1-P mounting rails.
• 2 combination knockouts for conduit
• Inside sprayed with water based anti resonance material
• 
• E40

1. G70W
2. G70PW

SE40SB

• ULC recognized as part of a fire device
• Surface mount back box, closed back type
• 6-5/8" square x 4" deep
• 1 combination k/o on the back, two on the side
• Design of enclosure reduces mechanical resonance, no dampening required
• Ground Screw included

• 
• SE40SB

1. G70W
2. G70PW

1. N/A

• Mounting Channels, sold as pairs, one pair required per back box
• 23-3/4" long, U-Channel construction, pre punched holes for locators to the back box.

• 
• MC1-P

1. See Specification Sheet

• Hole Saw for drywall or ceiling tile, max 10-3/8" Diameter
• Includes 2 dust shields
• Fits 10mm(3/8") corded or battery operated drills
• Cuts holes in seconds, contains most of the dust
• Carbide coated cutters
• Fully adjustable, 159-263mm(6-1/4" to 10-3/8") in 10mm (3/8")increments
• Economically priced